Размер шрифта
Цветовая схема
Изображения
Форма
Межсимвольный интервал
Межстрочный интервал
стандартные настройки
обычная версия сайта
закрыть
  • Вход
  • Регистрация
  • Помощь
Выбрать БД
Простой поискРасширенный поискИстория поисков
Главная / Результаты поиска

Evaluation of structure and corrosion behavior of FeAl alloy after crystallization, hot extrusion and hot rolling

Cebulski J., Pasek D., Chmiela B., Popczyk M., Swinarew A. S., Stanula A., Vashhkevich Z., Knechtle B.
Materials
Vol.13, Issue9, Num.2041
Опубликовано: 2020
Тип ресурса: Статья

DOI:10.3390/MA13092041

Аннотация:
The paper presents the results of tests on the corrosion resistance of Fe40Al5Cr0.2TiB alloy after casting, plastic working using extrusion and rolling methods. Examination of the microstructure of the Fe40Al5Cr0.2TiB alloy after casting and after plastic working was performed on an Olympus GX51 light microscope. The stereological relationships of the alloy microstructure in the state after crystallization and after plastic working were determined. The quantitative analysis of the structure was conducted after testing with the EBSD INCA HKL detector and the Nordlys II analysis system (Channel 5), which was equipped with the Hitachi S-3400N microscope. Structure tests and corrosion tests were performed on tests cut perpendicular to the ingot axis, extrusion direction, and rolling direction. As a result of the tests, it was found that the crystallized alloy has better corrosion resistance than plastically processed material. Plastic working increases the intensity of the electrochemical
Ключевые слова:
Electrochemical corrosion; FeAl; Intermetallic phase
Aluminum alloys; Aluminum corrosion; Binary alloys; Chromium alloys; Corrosion rate; Corrosion resistance; Corrosion resistant alloys; Corrosive effects; Electrochemical corrosion; Extrusion; Hot rolling; Microstructure; Sodium alloys; Sodium chloride; Testing; Titanium alloys; Alloy microstructure; Corrosion behavior; Corrosion current densities; Corrosion potentials; Corrosion tests; Processed materials; Rolling direction; Structure tests; Iron alloys
Язык текста: Английский
ISSN: 1996-1944
Cebulski J.
Pasek D.
Chmiela B.
Popczyk M.
Swinarew A. S.
Stanula A.
Vashhkevich Z. Zbignev 1970-
Knechtle B.
Cебулски Й.
Пасек Д.
Чмиела Б.
Попcзyк М.
Сwинареw А. С.
Станула А.
Ващкевич З. Збигнев 1970-
Кнечтле Б.
Evaluation of structure and corrosion behavior of FeAl alloy after crystallization, hot extrusion and hot rolling
Текст визуальный непосредственный
Materials
MDPI AG
Vol.13, Issue9 Num.2041
2020
Статья
Electrochemical corrosion FeAl Intermetallic phase
Aluminum alloys Aluminum corrosion Binary alloys Chromium alloys Corrosion rate Corrosion resistance Corrosion resistant alloys Corrosive effects Electrochemical corrosion Extrusion Hot rolling Microstructure Sodium alloys Sodium chloride Testing Titanium alloys Alloy microstructure Corrosion behavior Corrosion current densities Corrosion potentials Corrosion tests Processed materials Rolling direction Structure tests Iron alloys
The paper presents the results of tests on the corrosion resistance of Fe40Al5Cr0.2TiB alloy after casting, plastic working using extrusion and rolling methods. Examination of the microstructure of the Fe40Al5Cr0.2TiB alloy after casting and after plastic working was performed on an Olympus GX51 light microscope. The stereological relationships of the alloy microstructure in the state after crystallization and after plastic working were determined. The quantitative analysis of the structure was conducted after testing with the EBSD INCA HKL detector and the Nordlys II analysis system (Channel 5), which was equipped with the Hitachi S-3400N microscope. Structure tests and corrosion tests were performed on tests cut perpendicular to the ingot axis, extrusion direction, and rolling direction. As a result of the tests, it was found that the crystallized alloy has better corrosion resistance than plastically processed material. Plastic working increases the intensity of the electrochemical