Macro- and microscopic analyses of piles formed by Platonic solids
Zhao H., An X., Dong K., Yang R., Xu F., Fu H., Zhang H., Yan S.
Chemical Engineering Science
Vol.205, P. 391-400
Опубликовано: 2019
Тип ресурса: Статья
DOI:10.1016/j.ces.2019.05.018
Аннотация:
Sandpiles are ubiquitous in nature and engineering applications but still not fully understood due to the complexity of structures and materials properties. This work presents a systematic study on the piles of Platonic solids using the discrete element method (DEM), mainly focusing on the effect of particle shape on the repose angles and bottom pressure distributions of the piles. Five Platonic particles (tetrahedron, cube, octahedron, dodecahedron, and icosahedron) were discharged to form wedge-shaped piles. It was found that the repose angle did not increase with the decrease of particle sphericity. The pile formed by the cubes had the maximum repose angle and its bottom stress dip phenomena were more significant in terms of dip width and depth than that of other particle piles. The pressure distributions at different heights of the piles were quite similar to those of the whole piles, while the shear stress distributions near the boundaries exhibited different characteristics for t
Ключевые слова:
DEM simulation; Platonic solids; Sandpile; Stress/force behavior; Structure and property characterization
Distribution functions; Finite difference method; Geometry; Materials properties; Pressure distribution; Shear stress; Stiction; Coordination number; DEM Simulation; Engineering applications; Microscopic analysis; Platonic solids; Radial distribution functions; Sandpile; Structure and properties; Piles
Язык текста: Английский
ISSN: 1873-4405
Zhao H.
An X.
Dong K.
Yang R.
Xu F.
Fu H.
Zhang H.
Yan S. Syaokhun 1984-
Жао Х.
Ан Х.
Донг К.
Янг Р.
Ху Ф.
Фу Х.
Жанг Х.
Ян С. Сяохун 1984-
Macro- and microscopic analyses of piles formed by Platonic solids
Текст визуальный непосредственный
Chemical Engineering Science
Elsevier Science Publisher B.V.
Vol.205 P. 391-400
2019
Статья
DEM simulation Platonic solids Sandpile Stress/force behavior Structure and property characterization
Distribution functions Finite difference method Geometry Materials properties Pressure distribution Shear stress Stiction Coordination number DEM Simulation Engineering applications Microscopic analysis Platonic solids Radial distribution functions Sandpile Structure and properties Piles
Sandpiles are ubiquitous in nature and engineering applications but still not fully understood due to the complexity of structures and materials properties. This work presents a systematic study on the piles of Platonic solids using the discrete element method (DEM), mainly focusing on the effect of particle shape on the repose angles and bottom pressure distributions of the piles. Five Platonic particles (tetrahedron, cube, octahedron, dodecahedron, and icosahedron) were discharged to form wedge-shaped piles. It was found that the repose angle did not increase with the decrease of particle sphericity. The pile formed by the cubes had the maximum repose angle and its bottom stress dip phenomena were more significant in terms of dip width and depth than that of other particle piles. The pressure distributions at different heights of the piles were quite similar to those of the whole piles, while the shear stress distributions near the boundaries exhibited different characteristics for t